Features

Valspar Signature Colors® offers the colors of leading designers and the most popular brands in a revolutionary paint finish. This innovative paint technology, Advanced Ti³ Technology™ includes the highest quality 100% acrylic resins to deliver superior color definition, easy one coat application and superior durability.

Coverage

One gallon of paint will cover up to 400 sq. ft. on smooth surfaces. Allow extra for rough or porous interior surfaces, such as brick.

Where to Use

This paint is ideal for use on walls, ceilings and trim. It applies easily to properly prepared and primed plaster, wallboard, wood, brick, masonry and metal.

Preparing Your Surfaces

Clean and dry surface thoroughly, removing dirt, dust, rust, grease and wax. Scrape off loose paint. Remove wallpaper. Remove glue, shellac and sizing. Patch cracks and nail holes and prime. Paint will not adhere to glossy surfaces. Dull glossy surfaces with gloss remover or sandpaper. On new wallboard, smooth tape joints and wipe all powdery dust from surface. Prime bare wallboard with a primer formulated for that purpose. Plaster must be dry, fully cured and in good condition. Remove chalky residue and prime unpainted plaster. On ferrous metal, remove all rust and oil from surface. Primer ferrous metal surfaces with rust inhibitive metal primer. On galvanized metal, remove all rust and oil from surface. Spot prime rusty areas with a rust inhibitive metal primer. On new wood, sand smooth. Prime with an acrylic interior primer.

Dry Time

Dries to the touch in 30 minutes, longer in high humidity or cool temperatures. Paint only when surface and air temperatures are 50-90°F during application and drying time. Allow to dry 4 hours before recoating.

Warning!

If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log onto www.epa.gov/lead.