Step 1. Granite Crystals are optional. Stir Granite Crystals into Granite Paint for a sparkling effect if desired.

Step 2. Brush a 3 inch border ("cut-in") around the ceiling, floor, trim edges and corners. Note: Do not cut-in around the entire room at once as this can cause a banded appearance. Rather, brush out the edges in sections. This ensures a wet edge during rolling for an even appearance.

Step 3. Roll on first coat using a premium quality 1 1/4" nap roller. Work in 3 ft. square sections. Roll a large W. Then, fill in the square. Finish an entire vertical column of 3 ft. sections. When done, roll the full length from floor to ceiling. This will alleviate uneven sections and lap marks. Do not stretch this product. Allow to dry completely, at least 4 hours.

Step 4. To apply the second coat, use a premium quality 3" or 4" polyester brush. Basically, you will be applying Granite in a series of overlapping X's. Work in sections, but avoid a "squared off" pattern. Start with larger X's (roughly a foot in length). Then, overlap with smaller X's (about 4-6 inches). Continue to work until the entire wall is covered. Use both the broad width and narrow width (side bristles) of the brush. This will ensure both varying widths and lengths of stroke. Do not be afraid to use multiple strokes on top of each other.

Shown in Upperwall: 2118 Sea Agate, Lowerwall: 2121 Mica Stone, Chair Rail: 4007-9B Perfectly Blue

Color accuracy will vary based on monitor and printer calibrations. Please visit your local retailer to view actual color samples before making final painting decisions.

Try your technique on a practice board before you try it on the walls.

Random, irregular brush strokes are essential to achieve a successful Granite look. Do not follow a set pattern.